The 2164 Multifunctional Crab Clamp with 3.5" Ball Head Arm from SmallRig enables you to mount a 1/4"-20 threaded camera accessory, small light, or other component onto a rod or surface measuring up to 2" in width.
The clamp arm includes a 180° mini ball head at each end, enabling you to position your accessory at almost any angle. The clamp tightens easily using its large wingnut and the 3.5" arm is fastened via a thumb-lever.
1. Adjusted and tightened with a wingnut from any angles.
2. Clamps the accessories tight easily and conveniently.
3. Clamps the accessories with a diameter up to 40mm.
4. Max load<1.5kg.
WARNING: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Attention to all California residents, Proposition 65 or officially known as, the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more than 850 chemicals. August 2016, OEHHA adopted new regulations, to go into effect on August 30, 2018, which changes the information that is required in or on Proposition 65 warnings.
We want you to know and be aware of our product safety and CameraMall is taking all of the necessary steps to comply with the applicable safety and health requirements made by this Proposition 65.
Additional Information about Proposition 65
For background on the new Proposition 65 warnings, see https://www.p65warnings.ca.gov/new-proposition-65-warnings.
Proposition 65 and its regulations are posted at https://oehha.ca.gov/proposition-65/law/proposition-65-law-and-regulations.
To give CameraMall any notices of an alleged violation of the California Health and Safety Code Section 25249.5 or 25249.6, you must send us a notice at firstname.lastname@example.org.