An enhanced version of its predecessor, the AD200Pro TTL Pocket Flash Kit from Godox is built around a unique flash source with a standard speedlight head and a bare bulb head that give you the option of two distinctly different qualities of light. The kit comes with the two heads, lithium battery, charger, and carry case.
The speedlight head outputs the standard look of an on-camera flash that can be modified using an optional softbox, beauty dish, or umbrella. The bare bulb head features a removable flash tube and produces 360 degrees of soft, bright, nearly shadowless light. The head uses optional reflectors that focus the beam angle and give you directional control. The AD200Pro has impressive core features such as 200Ws of power adjustable in 9 steps from 1/256 to 1/1, recycling from 0.01 to 1.8 seconds, and flash durations as short as 1/15,380 sec. The flash runs on a removal, rechargeable lithium battery that will give you up to 500 full power flashes and thousands of lower power flashes.
The AD200Pro has 3 flash modes: Manual, TTL, and Multi (Stroboscopic). Manual outputs the user's choice of power, modeling light, first or second curtain sync, etc. Multi controls the stroboscopic rate up to 90 times (90 Hz). TTL takes advantage of the flash head's built-in X1 receiver. Optional X1 TTL transmitters are available for Nikon, Canon, Sony, Olympus, and FUJIFILM cameras. They will also detect a separately purchased LED head. The 32-channel wireless system controls flash mode, first and second curtain sync, High-Speed Sync up to 1/8000 second, power level, modeling lamp, and ready beeper at distances up to 328'. Firmware updates are obtainable on the Godox website.
The second generation of this sleek and versatile strobe, the AD200Pro has a series of enhancements over its predecessor:
- Dedicated Stable Color Temperature Mode, which improves color consistency to within +/- 100K throughout the entire power range
- Expanded nine stop power range, from 1/256 to 1/1, with 1/10th-stop increments
- Faster full-power recycle time of 1.8 sec
- Inclusion of a USB Type-C port for updating the flash's firmware
- Upgraded metal flash holder/umbrella mount for more secure and stable attachment to light stands
- Enhanced control panel with recessed design, additional navigation buttons, and a revised On/Off switch
Built-In 2.4 GHz Wireless X System
Built-in wireless receiver: control triggering power level, alert beep with optional wireless transmitter. Compatible with Nikon, Canon, Sony, Olympus, and Fuji TTL.
Bare Bulb and Speedlight Flash Heads
Bare bulb and speedlight flash heads are included to vary your quality of light. Color temperature is a steady 5600K over the entire power range.
Large Capacity Lithium Battery Pack
The 14.4V / 2900mAh battery pack gets 500 full power flashes with 0.01 to 1.8 second recycling.
Easily readable digital panel displays your adjustments
Barn Doors, color filters, and diffusers are available to personalize your work.
Numerous Control Functions
- 9-Step Power Range: 1/1 to 1/256
- Supports flash exposure compensation
- 1/8000 second High-Speed Sync
- First and second curtain sync
- Modeling lamp
- Manual flash
- Multi flash
- Custom functions
WARNING: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Attention to all California residents, Proposition 65 or officially known as, the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more than 850 chemicals. August 2016, OEHHA adopted new regulations, to go into effect on August 30, 2018, which changes the information that is required in or on Proposition 65 warnings.
We want you to know and be aware of our product safety and CameraMall is taking all of the necessary steps to comply with the applicable safety and health requirements made by this Proposition 65.
Additional Information about Proposition 65
For background on the new Proposition 65 warnings, see https://www.p65warnings.ca.gov/new-proposition-65-warnings.
Proposition 65 and its regulations are posted at https://oehha.ca.gov/proposition-65/law/proposition-65-law-and-regulations.
To give CameraMall any notices of an alleged violation of the California Health and Safety Code Section 25249.5 or 25249.6, you must send us a notice at firstname.lastname@example.org.